BEARING HOUSING

The Bearing Housing (bearing pedestal, bearing chock) is an important component of the ball mill, vertical mill, rotary kiln, rolling mill, etc.  Its quality directly impact on the production efficiency and equipment safe operation. Jieshengyuan is able to offer various types of cast steel bearing chocks according to customers' drawings and demands.

Specification：

Weight:> 1 Ton

Material:ZG35, ZG45, etc

Application:Rolling mill, ball mill, rotary kiln, vertical Roller mill

Customizable: Yes, according to customer's drawings

Our Advantages:

1. Our bearing housing uses high-quality steel ZG35, ZG45, with high hardness, strong wear resistance, high load-bearing, long continuous work, good stability, and long service life. 

 2. Our bearing housing sets the oil level observation scale, which make the staff be able to observe the oil level situation, timely replenish oil, to prevent accident damage caused by lack of oil lubrication.

 3. Our bearing housing takes use of thin oil lubricant to minimize the friction coefficient of bearings. So the energy-saving effect is good, the working temperature is much lower than the dry oil and extend the bearing service life.

 4. The fabrication route is governed by the provisions of the implemented Quality System ISO 9001:2015.

Casting accuracy:

According to Č SN 014470, it is classified as 4-5 levels, or according to DIN 1683, it is classified as GTB 17-20 levels

Heat treatment of castings: 1. Fire to eliminate internal stress; 2. Normalization and tempering; 3. Quenching and tempering

Casting processing: 1 Rough machining is carried out at the customer's site with a margin for precision machining; 2. Perform final processing according to the drawings

Inspection before delivery of castings: 1 Chemical analysis; 2. Mechanical testing; 3. Size agreement; 4. Conduct ultrasonic, coloring, or magnetic particle surface testing as required

We are a leading open die & closed die forgings and castings parts supplier, we produce rough machined, semi-finished, and finished parts and fabricated assemblies for demanding applications.